Abstract
To fabricate high efficiency, light-weight hydrogen storage materials in an economical way, a hydrogen induced mechanical alloying (HIMA) and an advanced melting/casting process were employed in a Mg-Ni hydride alloy system. The hydrogenation properties of the synthesized or/and cast specimen were evaluated with an automatic PCI (pressure-composition-isotherm) apparatus and TGA (thermo-gravimetric analysis). To produce Mg2NiHx intermetallics in an economical way, especially, Mg and Ni chips were mechanically alloyed under 2 MPa of hydrogen atmosphere by planetary ball milling. Adopting 66:1 BCR (ball to chips mass ratio) for HIMA process, fully hydrogenated alloys were obtained after 96 hrs of milling, resulting intotal hydrogen content of 2.25 mass%. The dehydriding temperature was found to be 453∼493 K. The composite phase obtained after 96 hrs of HIMA appeared to be composed of nanocrystalline and amorphous phases, of which structure was believed to enhance hydriding and dehydriding kinetics. The condition of BCR seemed to affect strongly the synthesis of the Mg2NiHx. In addition, the minimized Ni content specimens in Mg-Ni hydrides were successfully manufactured by Rotation- Cylinder method (RCM) without any heat treatments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.