Hydraulic Properties of Stony Vadose Zonesa

Abstract

ABSTRACTHydraulic properties of saturated and unsaturated stony soils were studied on a 3.35 m long column, 1.24 m in diameter, filled with alternating sand and boulder layers. The boulders averaged 6.2 × 15 × 20 cm in size and were laid down on their flat side. Tensiometers and a neutron probe access tube were placed in the column for measuring pressure heads and water contents, respectively. Saturated conditions were obtained by ponding the column. The resulting hydraulic conductivity K was 5.1 m/day. This value could also be calculated from the measured K for the sand alone on separate samples, using a simple equation that takes into account the void ratio of the sand alone and that of the boulder‐sand mixture. Unsaturated K was determined by applying water at less than ponded infiltration rates. Resulting relations between the unsaturated K and water content or negative pressure head could also be estimated from the relation between unsaturated K and pressure head for the sand alone and the calculated saturated K of the boulder‐sand mixture. The method of Millington and Quirk for calculating the relation between unsaturated K and water content also gave reasonable results. The dispersivity of the boulder‐sand column was 18 times that of the sand alone. Pore velocity was accurately estimated as the Darcy velocity divided by the volumetric water content. Hydraulic properties of stony vadose zones are difficult to determine. This work shows that they can be estimated from K relations measured in the laboratory on samples of the soil between the rocks. Knowledge of hydraulic properties of vadose zones is important in predicting movement of water and pollutants to the underlying ground water.