Hydraulic control system design for a PHEV considering motor thermal management

Abstract

In this paper, a design method for a PHEV hydraulic control system was proposed considering motor thermal management. Dynamic models of the target PHEV were developed including the hydraulic system, which consists of one mechanical and one electric oil pump. The required motor cooling flow was designed based on the motor temperature, which was obtained from a one-dimensional thermal equivalent circuit model including the heat source and oil spray cooling. Combining the PHEV powertrain model, hydraulic control system model, and the motor thermal model including the cooling system, an integrated simulator was developed for the target PHEV. Using the integrated simulator, the temperatures of MG1 and MG2 were investigated for various motor cooling flow rates when the PHEV underwent a highway driving cycle. The energy consumption of the hydraulic control system was also evaluated. It was found from the simulation results that a hydraulic control system of the target PHEV could be designed that satisfied the required flow for the motor cooling, lubrication and brake control using the design procedure proposed in this study.