Abstract
A commingled waste rock and tailings test pile and a waste rock test pile were evaluated to determine saturated hydraulic conductivity and destructively sampled to measure dry density. The commingled test pile contained a mixture of filtered tailings and waste rock blended to isolate waste rock particles as inclusions within the tailings matrix. Test piles were constructed in the shape of truncated 5 m high pyramids with 25 m base sides and flat 5 m × 5 m top surfaces, and instrumented to monitor water content (and additional geochemical indicator parameters) within the test pile and seepage from the base of the pile. Piles were decommissioned after 26 months of operation. Saturated hydraulic conductivities were measured using sealed double-ring infiltrometers (2.4 m square outer ring and 1 m square inner ring). Tensiometers and embedded water content sensors were used to measure progression of the wetting front, and the final location of the wetting front in the commingled test pile was directly measured during decommissioning. Field-measured saturated hydraulic conductivities were compared to laboratory-measured results intended to simulate the test piles. Despite having a lower average density, the commingled waste rock and tailings had a hydraulic conductivity approximately 2.5 times lower than the waste rock.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
