Abstract

Abstract The FEBEX “in situ” test was performed at an underground laboratory in Grimsel (Switzerland) with the aim of studying the behaviour of components in the near-field of a nuclear waste repository. A gallery of 2.3 m in diameter was excavated through the granite and two heaters, simulating the thermal effect of the wastes, were placed inside, surrounded by a barrier of highly-compacted bentonite blocks. In 2015, after 18 years of operation, the experiment was dismantled. Some of the bentonite samples taken were tested in the laboratory to characterize, among others, their physical state and determine their permeability and swelling capacity. There were significant changes in water content and dry density across the bentonite barrier: their distribution was radial around the axis of the gallery, with the water content decreasing from the granite towards the axis of the gallery and the dry density following the inverse pattern. The swelling capacity of the samples was related to their position in the barrier. In the internal, drier part of the barrier an increase of the swelling capacity with respect to the reference bentonite was detected, whereas the samples from the external part swelled less than expected. This was attributed to the different salinity of the samples. The hydraulic conductivity was mainly related to the dry density of the samples and decreased with respect to the reference bentonite. This decrease was not related to the position of the samples and could be related to the microstructural reorganization of the bentonite during the 18-year operation –which brought about an average decrease in the pore size– and to the low hydraulic gradients applied to determine the permeability of the samples retrieved.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call