Abstract
The Molodensky-Badekas model is one of the similarity transformation models used in Ghana for transferring Global Positioning System (GPS) coordinates from the geocentric World Geodetic System 1984 (WGS 84) ellipsoid to the local non-geocentric coordinate system, and vice versa. The objective of the Molodensky-Badekas model is to introduce a centroid to cater for the correlation that exists between the parameters when used over a small portion on the earth surface. However, the Molodensky-Badekas model performance depends on a particular centroid method adopted and the adjustment technique used. By virtue of literature covered, it was realised that the arithmetic mean centroid has been the most widely used. In view of this, the present study developed and tested two new hybrid centroid techniques known as the harmonic-quadratic mean and arithmetic-quadratic mean centroids. The proposed hybrid approaches were compared with the geometric mean, harmonic mean, median, quadratic mean and arithmetic mean. In addition, the Total Least Squares (TLS) technique was used to compute the transformation parameters with varying centroid techniques to investigate and assess their accuracies in precise GPS datum transformation parameters estimation within the Ghana Geodetic Reference Network. Statistical indicators such as Mean Error (ME), Mean Squared Error (MSE), Standard Deviation (SD), and Mean Horizontal Position Error (MHPE) were used to assess the centroid techniques performance. The results attained show that the Harmonic-Quadratic Mean produced reliable coordinate transformation results within the Ghana geodetic reference network and thus could serve as practical alternative technique to the frequently used arithmetic mean. Keywords: Coordinate transformation, Molodensky-Badekas model, Centroid, Total Least Squares
Highlights
Transfer of coordinates between different reference frames is an indispensable tool in geospatial professions like geodesy, surveying and photogrammetry
The introduction of the centroid coordinate in the Molodensky-Badekas model tends to eliminate the correlation of transformation parameters that exists in Bursa-Wolf model when applied to a network of points that cover a small portion of the Earth surface
The generic mean centroid applied in the Molodensky-Badekas model has been varied by applying the geometric mean, harmonic mean, quadratic mean, median and two proposed hybrid centroids
Summary
Transfer of coordinates between different reference frames is an indispensable tool in geospatial professions like geodesy, surveying and photogrammetry. The Molodensky-Badekas model is one of the commonest conformal transformations used by researchers in Ghana (Ayer and Tiennah, 2008; Dzidefo, 2011; Ziggah et al, 2013a) and other countries due to their simplicity in application. The arithmetic mean centroid method is the most widely used approach by most researchers to compute values of centroid coordinates in the implementation of the Molodensky-Badekas model within their respective countries (Kheloufi, 2006; Turgut, 2010; Dzidefo, 2011; Okwuashi and Eyoh, 2012; Stankova et al, 2012; Mihalache, 2012; Ziggah et al, 2013a; Solomon, 2013; Mohammed and Mohammed, 2013). Based on analysis of their results, they concluded that the transformation parameters of the root mean square (quadratic mean) centroid are the most realistic as compared to arithmetic mean, harmonic mean and median centroids
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
