Abstract
Today, a lab-on-a-chip is one of the most promising ways to create sensor devices for gas and liquid analysis for environmental monitoring, early diagnosis, and treatment effectiveness assessment. On the one hand, this requires a large number of measurements and, on the other hand, involves minimum consumption of the test analytes. Combination of highly sensitive photonic integrated circuits (PICs) with microfluidic channels (MFCs) is necessary to solve this problem. In this work, PICs based on a silicon nitride platform integrated with MFCs for studying liquids and gases were developed. Different concentrations of isopropanol in de-ionized water were used as the analyte. Based on this, the sensitivity (S) and detection limit (DL) of the analyzed solution were evaluated. Entire system calibration was carried out to calculate S and DL, considering experimental and numerical simulation data. This development may be of interest as a promising platform for environmental monitoring and realization of point-of-care strategy for biomedical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
