Hybrid machine learning approach for accurate and expeditious 3D scanning to enhance rapid prototyping reliability in orthotics using RSM-RSMOGA-MOGANN

Abstract

Abstract This study aims to develop a multidisciplinary artificial hybrid machine learning (AHML) approach to reduce the scanning time (ST) of the human wrist and improve the accuracy of 3D scanning for anthropometric data collection. A systematic AHML approach was deployed to scan the human wrist distal end optimally using a portable SENSE 2.0 3D scanner. A central composite design (CCD) matrix was developed for three input variables; light intensity (LI = 12–20 W/m2), capture angle (CA = 10°–50°), and scanning distance (SD = 10–20 inches) for executing the experimental runs. For accuracy evaluation, the wrist perimeter on the distal end was checked using CREO Parametric software for wrist perimeter error (WPE). Various AHML tools were developed using: response surface methodology (RSM), multi-objective genetic algorithm RSM, and multi-objective genetic algorithm neural networking (MOGANN). The optimal process parameters recommended by the hybrid tools were experimentally validated for their prediction accuracy. The MOGANN approach combined with the Bayesian regularization algorithm (trainabr) provided the best mutual combination of optimal ST = 20.072 sec and WPE = 0.375 cm corresponding to LI = 12.001 W/m2, CA = 29.428°, and SD = 18.214 inch, with a significant percentage reduction of 55.83% in WPE. Executing 3D scanning of the human wrist over the optimized process parameters predicted by AHML tools will ensure the availability of precise scans for the rapid prototyping of customized orthotic devices in a reliable manner.