Abstract
To integrate compound semiconductors with foreign substrates can lead to superior or novel functionalities. The design and fabrication of heterogeneously integrated waveguide photodetectors with Silicon-on-Insulator micro-ring resonator are reported in this paper. The micro-ring resonator was fabricated by utilizing electron beam lithography and inductively-coupled-plasma reactive ion etching technique, which is used for wavelength selectivity. The waveguide photodetectors fabricated by wet etching were used for light detection. The free spectral range (FSR) of the hybrid integrated device was about 24nm, and the dark current of 7.9nA was achieved at the reverse bias voltage of 2.0V. The measured response of the photodetector at through port was 0.538μA/W at the wavelength of 1556nm and a reverse bias of 1V.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.