Abstract
Abstract Polyvinylidene fluoride (PVDF) is a semicrystalline polymer exhibiting piezoelectric and pyroelectric properties which has been used for sensing infrared energy and the measurement of high frequency stress and strain, such as shocks. Despite the low material cost, durability, high sensitivity, and fast response, PVDF-based sensors have not been successfully used in sensors for large structures (such as buildings and bridges) with dominant low frequency modes, where these benefits would seem appropriate. One reason is that the low frequency response of the sensor and integrated charge amplifier (the hybrid characteristic of the sensor) has not been adequately measured and modeled. In this paper we report precise measurements of the hybrid frequency response of a charge-mode curvature sensor in the range 0.1–45 (Hz) using a random vibration method in conjunction with a precision displacement stage. The experimentally determined response is compared to a SPICE model. The results show a characteristic high pass response with cutoff in qualitative agreement with the model. However the rolloff appears consistently more rapid, with possible attenuation at high frequencies. These results will be useful for developing more accurate models of the sensor, and to further the use of PVDF in low frequency applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have