Hybrid dual-loop control method for dead-time second-order unstable inverse response plants with a case study on CSTR

Abstract

Abstract Unstable processes are hard to stabilize as they contain one or more positive poles which result in unbounded dynamic behavior. The occurrence of the delay and positive zeros often creates more difficulty in controlling such unstable plants. Most control strategies meant for first-order unstable processes fail to stabilize and control the higher-order unstable processes. Hence, a new dual-loop hybrid control structure is suggested for dead-time unbounded second-order processes with positive/negative zeros. Inner-loop has a stabilizing PID controller. The PID controller parameters are derived by comparing the numerator and characteristic polynomial coefficients in the transfer function for internal-loop servo action. A fractional-order internal model controller (FOIMC) is used in the external-loop. Methods for the selection of outer-loop tuning parameter and fractional-order are also discussed. By comparing the simulation results with a contemporary single-loop scheme, the usefulness of the suggested scheme is proved. The suggested scheme is capable of minimizing the overshoot and improving the overall dynamic performance. Finally, the usefulness of the suggested scheme is also demonstrated by a case study on temperature control of a continuous stirred tank reactor (CSTR) during a first-order irrevocable exothermic reaction.