Abstract
The partial transmit sequence (PTS) technique is a fairly suitable scheme to mitigate the high peak-to-average power ratio (PAPR) problem inherent in 5G multicarrier systems, especially considering a high-order QAM modulation design. However, the high computational complexity level and the speed of the convergence for optimizing the phases of the transmitting signal restrict this technique in practical applications. In this paper, a low-complexity frequency-domain-evaluated PTS (F-PTS) based on a spacing multiobjective (SMO) processing algorithm is proposed to reduce the PAPR values. The PAPR performance are accurately predicted in terms of modifying relative dispersion in the frequency domain. As a result, the complexity of searching the optimal phase factors and IFFT computing is simplified. Moreover, a frequency-domain- and time-domain-evaluating PTS (FTD-PTS) is employed to search the optimal solution with a reasonable complexity. Simulation results verify that the operation rate of F-PTS is significantly improved after transferring the exhaustive search strategy of PTS into the SMO algorithm, and the F-PTS PAPR reduction performance is just 0.3 dB away from theoretical optimal performance. The FTD-PTS spends an acceptable operation rate to obtain optimal PAPR reduction performance, which subtracts 0.5 and 0.6 dB more than PSO-PTS and conventional PTS at CCDF=10−3, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.