Abstract
A hybrid configuration of Sagnac and modal interferometer is proposed to obtain high extinction ratio (ER). Firstly, a modal interferometer based on core-offset splicing of three sections of single mode fiber is obtained through manually controlling the fusion parameters. Then the modal interferometer is inscribed into a Sagnac loop, which can obtain a higher ER by carefully adjusting the polarization controller (PC). There is about 10dB extinction ratio higher than the modal interferometer. The higher the extinction ratio is, the sharper the bottom of waveform will be, so the wavelength shifts can be measured more accurately when sensing temperature, pressure or other parameters. The measured sensitivity of temperature is 48.67pm/°C in the band of 1550nm. It also can be applied in strain measurement, vibration measurement and so on.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Optik - International Journal for Light and Electron Optics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.