Abstract
In this study, a smart and affordable system that utilizes an RGB-D camera to measure the exact position of an operator with respect to an adjacent robotic manipulator was developed. This developed technology was implemented in a simulated human operation in an automated manufacturing robot to achieve two goals; enhancing the safety measures around the robot by adding an affordable smart system for human detection and robot control and developing a system that will allow the between the human-robot collaboration to finish a predefined task. The system utilized an Xbox Kinect V2 sensor/camera and Scorbot ER-V Plus to model and mimics the selected applications. To achieve these goals, a geometric model for the Scorbot and Xbox Kinect V2 was developed, a robotics joint calibration was applied, an algorithm of background segmentation was utilized to detect the operator and a dynamic binary mask for the robot was implemented, and the efficiency of both systems based on the response time and localization error was analyzed. The first application of the Add-on Safety Device aims to monitor the working-space and control the robot to avoid any collisions when an operator enters or gets closer. This application will reduced and remove physical barriers around the robots, expand the physical work area, reduce the proximity limitations, and enhance the human-robots interaction (HRI) in an industrial environment while sustaining a low cost. The system was able to respond to human intrusion to prevent any collision within 500 ms on average, and it was found that the system’s bottleneck was PC and robot inter-communication speed. The second application was developing a successful collaborative scenario between a robot and a human operator, where a robot will deposit an object on the operator’s hand, mimicking a real-life human-robot collaboration (HRC) tasks. The system was able to detect the operator’s hand and it’s location then command the robot to place an object on the hand, the system was able to place the object within a mean error of 2.4 cm, and the limitation of this system was the internal variables and data transmitting speed between the robot controller and main computer. These results are encouraging and ongoing work aims to experiment with different operations and implement gesture detection in real-time collaboration tasks while keeping the human operator safe and predicting their behavior.
Highlights
The demands and trends of the current market require enhanced manufacturing systems with reduced delivery times, mass production, and product customization, which impose a greater need for system flexibility and adaptability
The paper is organized as follows: Section II is a literature review about robotics and their application in the industrial system, robotics safety regulations and standards, and collaboration and interaction between human and robots, Section III is a description of the robot and sensory system developed in this research, Section IV describes the followed methodology including the geometric model of the robot-sensor system, the process of calibration, and the detection of the operator, while in Section V, we evaluate the two methods of interaction between human and robot and reporting our findings and Section VI concludes the paper and describes the future plan
The operator introduced his/her hands within the red zone to force the robot to slow significantly to almost not moving. These actions were captured by the camera and highlighted by the associated colors shown in Fig. 5, which displays the areas of interest corresponds to the detection of the pixels as part of the foreground and the outline of the ScorBot is shown inside the binary mask
Summary
The demands and trends of the current market require enhanced manufacturing systems with reduced delivery times, mass production, and product customization, which impose a greater need for system flexibility and adaptability. It is important to note that collaborative methods can be adopted even when using traditional robots This requires the use of several and expensive safety devices such as laser sensors or visual systems. This study utilizes www.ijacsa.thesai.org (IJACSA) International Journal of Advanced Computer Science and Applications, Vol 12, No 1, 2021 a lowcost RGBD camera to measure the position of an operator with respect to the robotic manipulator. While this configuration of specific measurement was utilized to track human beings [6], to our knowledge and based on the conducted literature review, it was not previously studied in the context of human-robot interaction and collaboration. It was proven that the top-view RGBD cameras can be utilized successfully in several applications where behaviors and interactions can be analyzed and they are very attractive due to their affordability and the sufficient information extracted from the provided pictures or live feed
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Advanced Computer Science and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
