Abstract
Rare-earth (RE) element addition can remarkably improve the mechanical properties of magnesium alloys through precipitation hardening. The morphology, distribution and crystal structure of precipitates are regarded as major strengthening mechanisms in the Mg-RE alloys. In order to understand the formation of precipitates during aging at 225 °C in a Mg-10Gd-3Y-0.4Zr alloy (GW103K) with high strength and heat resistance, a high-resolution transmission electron microscopy (HRTEM) was employed to characterize the microstructural evolution. It was found that three types of precipitates were observed in the alloy at the early stage, named as: single layer D019 structure, one single layer D019 structure and one layer of Mg, two parallel single layers (containing RE) and Mg layer in between, which was regarded as ordered segregation of RE, precursors to form β″ and β′ phase, respectively. Both of β″ and β′ phase were transformed from the precursors. It was also found that large size of β′ phase and the small size of β″ phase were constantly existent in the whole aging process. β′ phase played a major role in the strengthening of the GW103K alloys and the decrease of the hardness was caused by the coarsening of β′ phase.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
