Abstract
Pyridine, 3-aminopyridine, 4-dimethylaminopyridine, and N, N-dimethylamine are reactive bases that may be used in the preparation of the pharmaceutical ingredient alogliptin (ALO). They are considered as potentially genotoxic impurities (PGIs) since they contain electrophilic functional groups. Therefore, they should be monitored at the allowed limits in ALO. The aim of this study was to develop a novel liquid chromatography-mass spectrometry (LC-MS) method to estimate quantities of pyridine, 3-aminopyridine, 4-dimethylaminopyridine, and N, N-dimethylaniline impurities in ALO drug material. The separation was performed on Kromasil CN (250 mm × 3.9 mm, 3.5 µm) column in reversed phase mode. The mobile phase was a mixture of water-methanol (55:45, v/v) containing 2.5 mM ammonium acetate and 0.1% formic acid. Impurities were detected by MS in selected ion monitoring mode at m/z = 80, 95, 122, and 123 for pyridine, 3-aminopyridine, N, N-dimethylaniline, and 4-dimethylaminopyridine, respectively. The flow rate of the method was 0.5 mL/min. The sensitivity of the method was excellent at levels much less than the allowed limits. The method had excellent linearity in the concentration ranges of Quantitation Limit (QL)-150% of allowed limits and coefficients of determination were above 0.9990. The recovery ratios were in the range of 93.56-110.28%. Results showed good linearity, precision, accuracy, sensitivity, selectivity, robustness, and solution stability. The studied method was applied to test two samples of raw materials and one sample of tablets. The method discussed here could be very useful for controlling potentially genotoxic impurities (PGIs) levels in ALO during its synthesis, and for QC testing of ALO raw materials before using them in the preparation of pharmaceutical products.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.