How does carbonation of alkali-activated slag and Portland cement systems impact steel corrosion differently?

Abstract

Carbonation of cementitious materials, associated with neutralization of pore solution, is one of the prevalent reasons for inducing corrosion of steel in concrete. Compared with ordinary Portland cement (OPC) concrete, the poorer carbonation resistance of alkali-activated slag (AAS) concrete leads to serious durability concerns of a higher risk of steel corrosion. This work investigates the corrosion behaviors of steel embedded in intact and carbonated AAS and OPC mortars exposed to various relative humidity conditions, with the aim of fostering a better understanding of how carbonation impacts steel corrosion differently in these two cementitious systems. The results show that uncarbonated AAS mortars have better protective ability against corrosion than OPC counterparts; however, poorer performance after complete carbonation. It is mainly attributed to the combined effect of severe deterioration and coarsening of pore structure and increased ratio of chloride ion concentration to hydroxide ion concentration ([Cl−]/[OH−]) in pore solution, resulted from the consumption of hydroxide ions and release of bound chloride after carbonation. Besides, the different shifts of R-C (material resistivity versus corrosion rate) relationship lines in AAS and OPC mortars after carbonation are observed, which is ascribed to the different compositional and microstructural evolutions induced by carbonation in these two cementitious systems.