Abstract
AbstractUnderstanding how carbonate factories influence platform evolution is either based on qualitative conceptual models or quantitative numerical stratigraphic forward models. This study establishes new production depth profiles for four Cenozoic carbonate factories and uses two‐dimensional stratigraphic forward models to explore how interactions between sediment production and transport within carbonate systems influence carbonate platform development. Newly established production/depth profiles are used to model photozoan and heterozoan carbonate grain associations, and the associated carbonate producing factories, and results are compared with well‐studied outcrop successions. Sediment production from photozoan and heterozoan grain associations is also equalized, so that the total sediment production is the same but the depth/production profiles retain their distinctly different form. Thus, the effect of the different production profiles can be assessed. Ramps form when sediment diffusional transport rates are high relative to production rates and flat‐top steep‐margin platforms form when sediment diffusional transport rates are low relative to production rates, whether they are photozoan or heterozoan grain associations. The control exerted by sediment production and transport is expressed as a sediment transport–production ratio where transport ratio is a diffusional sediment transport in two‐dimensions and production ratio is the total sediment production rate which is the product of a production profile that varies in depth and laterally. The transport–production ratio is a key control on the evolution and geometry of carbonate platforms. This is the case with different production profiles (both euphotic and oligophotic) and in mixed grain‐size and mixed transport‐rate systems. Carbonate producing factories significantly influence the rate of sediment production, the depth distribution of sediment production (production profiles), as well as the type of grain sizes produced (influencing resistance to erosion). Thus, different types of carbonate grain associations, and the associated carbonate producing factories, can produce the critical differences between carbonate platform geometries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.