Abstract
This work investigated the hot tearing susceptibility of TiB2 reinforced Al–5Cu matrix composites. The results indicated that the hot tearing susceptibility of Al–5Cu alloy was significantly decreased when the TiB2 content was less than 3%. The improvement was attributed to the TiB2 particles promoted the grain refinement. The hot tearing susceptibility of TiB2-reinforced Al–5Cu matrix composite decreased first and then increased with the increase of TiB2 content. The 2TiB2/Al–5Cu composite had the smallest hot tearing susceptibility value. It could be ascribed to the refined grain and shortened solidification temperature range, which contributed to the hot tearing susceptibility decrease. Nevertheless, the 4TiB2/Al–5Cu and 6TiB2/Al–5Cu composites had more severe hot tearing susceptibility than others. The reason was that the enlarged solidification temperature range increased the solidification shrinkage strain, which was adverse to the hot tearing susceptibility improvement. Furthermore, the increase of TiB2 led to the formation of large particles agglomeration, which lowered the hot tearing initiation force and the feeding capacity of liquid metal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
