Abstract
The modeling of the forming of materials at high homologous temperatures allows obtaining optimum forming parameters, reduced costs and improving final properties of the finished product. In this work, the behavior of the ZK30 Magnesium alloy was characterized by means of compression tests at temperatures 300 to 450oC and strain rates between 0.1 and 8.7 s-1. Using data from these tests, the parameters of the Garofalo equation are calculated. In addition, by means of the second Lyapunov stability criterion, the optimum temperature at a given temperature is determined which should minimize the appearance of deformation bands and cracks during hot working. This temperature was found to be 641 K (368oC) at 8.7 s-1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.