Abstract
In this study, hot deformation behavior and microstructure evolution of a new near beta titanium alloy reinforced with trace TiCp (2 vol%) are investigated by isothermal compression test. The flow stress curves present various characteristics based on the deformation parameters. The hot deformation activation energy is determined to be 507.1 KJ mol−1, which is lower than that of the matrix alloy. Based on the dynamic material model (DMM), processing map at the strain of 0.6 indicates that flow instability mainly concentrates at 780–820 °C and strain rate higher than 0.22 s−1. Results of microstructure evolution illustrate that flow instability is characterized by the cracking, localized plastic flow, and bending of TiC particles. In the safety region, the morphology and fraction of α and β phases are closely depended on deformation conditions. At α/β field, dynamic recrystallization (DRX) of β grains dominants the deformation mechanism due to the existence of TiC particles by providing nucleation sites. Meanwhile, the DRX degree of β grains is enhanced markedly compared with that of the matrix alloy in β phase field. Finally, deformation mechanism evolution under the given processing conditions is illuminated.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
