Abstract
The hot working behavior of VCN200 medium carbon low alloy steel was analyzed by performing hot compression tests in temperature range of 850–1150°C and at strain rates of 0.001–1s−1. Flow curves were typical of dynamic recrystallization during hot working over temperature range of 900–1150°C and strain rates of 0.001–1s−1. However, at lower temperatures no indication of flow softening was observed. The constitutive analysis using the hyperbolic sine function was performed and the value of apparent activation energy for the hot deformation determined to be about 435kJ/mol. The flow curves up to the peak were successfully modeled using a dynamic recovery model. All the factors in this model were defined in terms of the Zener–Hollomon parameter. A modified form of Avrami equation was used to estimate the fractional softening due to the dynamic recrystallization for any given strain in flow curve. Using this model, the flow curves were successfully predicted and generalized to different deformation conditions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
