Abstract
It is necessary to have a deep understanding of the deformation behavior of magnesium matrix nanocomposites to achieve precise control of components. In this work, the as-cast graphene reinforced magnesium matrix nanocomposites were produced by in-situ vapor-liquid reaction. The flow stress features of the nanocomposites were studied by isothermal compression. The constitutive equation and the processing map of nanocomposites were established under the given load conditions based on the stress-strain curve. The sample is in a stable processing state at a compression temperature of 350 ℃∼450 ℃ with a compression rate of 0.001 s−1 and a compression temperature of 350 ℃ with a compression rate of 0.01 s−1. Furthermore, graphene distributed within the grains facilitated the retention of high dislocation density, which increased the driving force of recrystallization. Recrystallized grains can be generated by the progressive rotation of subgrain due to grain boundary migration being inhibited by graphene. This work provides an important guideline for the optimization of deformation techniques of in-situ nanocomposites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
