Abstract

As the experimental ITER fusion reactor faces its final construction phase, design activities of the next reactor DEMO that will supply net electrical energy to the grid are being conducted in Europe. DEMO will be significantly larger than ITER, and its magnet system will be key to confine the plasma and control its shape. In particular, the Toroidal Field (TF) Coils are necessary to generate the closed toroidal field lines that confine the plasma in a tokamak fusion reactor. The interaction of the current in these coils with the magnetic field produced by the poloidal magnet system induces out-of-plane forces that make a three-dimensional structural assessment of the TF magnet structure unavoidable. Moreover, Poloidal Field (PF) Coils are supported by the TF Coil casings and are to be included in the analysis of a global model of the magnet system. Nevertheless, due to the fact that Winding Packs (WP) in Fusion magnet coils are heterogeneous and rather complex structures, accounting for a detailed model of the WP with a fine mesh in a 3-D analysis of the magnet system can become extremely costly. Homogenization techniques are therefore commonly used to model the WP by means of a uniform elastic block with orthotropic thermo-mechanical properties. Several techniques exist for this purpose and a variety of approaches are in use in the fusion magnet community yielding different values for the effective properties. This work describes homogenization techniques stemming from an energetic criterion that forces equal stored elastic energy in the heterogeneous structure and in the homogenized volume and presents a comparison between them with the goal to contribute to the founded standardization of the structural analysis procedures in the fusion magnet field, with special emphasis in the challenging DEMO magnet coils. The mentioned standardizations are crucial if the design and construction of Fusion Magnets are to become widespread activities in the future.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call