Abstract
The design or modification and in general the analysis and control of nuclear reactors require complex calculations, which are carried out by numerical codes including neutronic and thermal-hydraulic components. Among the neutronic codes, the deterministic ones which solve the neutron transport/diffusion equation simulate the reactor core by dividing it into homogenized zones, i.e. volumes within which the macroscopic nuclear properties are considered uniform. These codes have been extensively used and tested for several decades and are shown to perform well when they analyze reactor cores containing regions with relatively homogeneous distributions of fuel, moderator and absorbing materials. In this work, the sensitivity of computed key neutronic parameters to the partitioning of the reactor core in homogenized zones is examined. Application is made for a configuration of the Greek Research Reactor (GRR-1) core, which is pool type, fueled by slab-type fuel elements. For the calculations, the neutronic code system consisting of XSDRNPM (cell-calculations) and CITATION (core analysis) is used with two different definitions of homogeneous zones for the special/control fuel assemblies. The effect on computations of neutron flux distribution, void-induced reactivity and total control rod worth is examined based on corresponding measurements. It is shown that with a more appropriate partition in homogeneous zones, the agreement of computed results with measurements can be remarkably improved concerning mainly the neutron flux, while the control rods worth is the less affected quantity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have