Homogeneous wet-spinning construction of skin-core structured PANI/cellulose conductive fibers for gas sensing and e-textile applications

Abstract

Fiber-based wearable electronic textiles have broad applications, but non-degradable substrates may contribute to electronic waste. The application of cellulose-based composite fibers as e-textiles is hindered by the lack of fast and effective preparation methods. Here, we fabricated polyaniline (PANI)/cellulose fibers (PC) with a unique skin-core structure through a wet-spinning homogeneous blended system. The conductive network formation was enabled at a mere 1 wt% PANI. Notably, PC15 (15 wt% PANI) shows higher electrical conductivity of 21.50 mS cm−1. Further, PC15 exhibits excellent ammonia sensing performance with a sensitivity of 2.49 %/ppm and a low limit of detection (LOD) of 0.6 ppm. Cellulose-based composite fibers in this work demonstrate good gas sensing and anti-static properties as potential devices for smart e-textiles.