Holographic Optical Element for Visual Display Applications

Abstract

Off-axis and off-bisector reflection-type holographic visual display elements have been recorded in dichromated gelatin deposited on planar or spherical shell substrates of glass or Plexiglas. A procedure for bonding gelatin to Plexiglas is given. Holographic elements are recorded at the argon wavelength of 514.5 nm and reconstructed with spectral lines from a low pressure mercury arc lamp. Measured image characteristics for a flat substrate hologram agree with ray-tracing calculations. A swelling of the gelatin by approximately 6.6% after processing does not perceptibly affect the dispersion, astigmatism, or distortion in the image, that is, the grating equation depends on the spacing between the fringes on the surface of the gelatin and is not affected by the swelling or shrinking. However, the Bragg equation depends on the distance normal to the fringe planes and is affected by thickness changes of the gelatin. Therefore, this thickness change is taken as an independent parameter and used to adjust the wavelength for maximum diffraction efficiency, without affecting the image angle. Data reveal a near linear relationship between the dichromate concentration of 0.5-10% used to photosensitive the gelatin and the display wavelength of maximum diffraction efficiency. Lateral dispersion is 0.12 +/- 0.01 degrees / nanometer for both planar and spherical shell substrate elements recorded in quite similar geometry, but their astigmatisms are not alike.