Abstract

A hollow core fiber (HCF) is spliced with a single-mode fiber, and then, the end face of the HCF is etched to form a microsphere interferometer for measuring gas pressure and environmental temperature. The total length of each microsphere is less than 200μm. We fabricated two such structures and used femtosecond laser pulses to drill micro-holes on the HCF walls of both structures. One of the structures is directly used to measure air pressure, achieving a sensitivity of up to 2.857 nm/MPa while being almost insensitive to temperature. This structure is capable of assessing pressure down to 3.4kPa within the range of 0-0.5 MPa. Another structure is filled with thermally sensitive material dimethyl silicone oil through a micro-hole, and then, it is sealed with AB adhesive to form a harmonic Vernier effect temperature sensor, with a sensitivity of up to -5.16 nm/°C. This structure is capable of assessing temperature down to 0.38 °C within the range of 30-60 °C. Additionally, the sensors have good repeatability and stability and compact structure and simple manufacturing and can be used as a sensing probe for monitoring gas pressure and temperature under extreme environments.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.