Abstract
The first peritoneal accesses were devices that had been used in other fields (general surgery, urology, or gynecology): trocars, rubber catheters, and sump drains. In the period after World War II, numerous papers were published with various modifications of peritoneal dialysis. The majority of cases were treated with the continuous flow technique; rubber catheters for inflow and sump drains for outflow were commonly used. At the end of the 1940s, intermittent peritoneal dialysis started to be more frequently used. Severe complications of peritoneal accesses created incentive to design accesses specifically for peritoneal dialysis. The initial three, in the late 1940s, were modified sump drains; however, Ferris and Odel for the first time designed a soft, polyvinyl intraperitoneal tube with metal weights to keep the catheter tip in the pelvic gutter where the conditions for drain are the best. In the 1950s, intermittent peritoneal dialysis was established as the preferred technique; polyethylene and nylon catheters became commercially available and peritoneal dialysis was established as a valuable method for treatment of acute renal failure. The major breakthrough came in the 1960s. First of all, it was discovered that the silicone rubber was less irritating to the peritoneal membrane than other plastics. Then, it was found that polyester velour allowed an excellent tissue ingrowth creating a firm bond with the tissue. When a polyester cuff was glued to the catheter, it restricted catheter movement and created a closed tunnel between the integument and the peritoneal cavity. In 1968, Tenckhoff and Schechter combined these two features and designed a silicone rubber catheter with a polyester cuff for treatment of acute renal failure and two cuffs for treatment of chronic renal failure. This was the most important development in peritoneal access. Technological evolution never ends. Multiple attempts have been made to eliminate remaining complications of the Tenckhoff catheter such as exit/tunnel infection, external cuff extrusion, migration leading to obstruction, dialysate leaks, recurrent peritonitis, and infusion or pressure pain. New designs combined the best features of the previous ones or incorporated new elements. Not all attempts have been successful, but many have. To prevent catheter migration, Di Paolo and his colleagues applied the old idea of providing weights at the catheter tips to Tenckhoff catheters. In another modification, Twardowski and his collaborators created a permanent bend to the intra-tunnel portion of the silicone catheter to eliminate cuff extrusions. The Tenckhoff catheter continues to be widely used for chronic peritoneal dialysis, although its use is decreasing in favor of swan-neck catheters. Soft, silicone rubber instead of rigid tubing virtually eliminated such early complications as bowel perforation or massive bleeding. Other complications, such as obstruction, pericatheter leaks, and superficial cuff extrusions have been markedly reduced in recent years, particularly with the use of swan-neck catheters and insertion through the rectus muscle instead of the midline. However, these complications still occur, so new designs are being tried.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.