Abstract
The present study investigates the high-temperature oxidation behaviour of nanostructure surface layered AISI 304L stainless steel. A severely deformed layer of ∼300 μm thickness, consisting of nanoscale grains (∼40 nm size) in the topmost region, is successfully developed using the surface mechanical attrition treatment (SMAT) process. The SMATed layer is substantially stable up to 700 °C; however, the surface hardness is reduced by ∼37% at 800 °C for 25 h oxidation duration. Glow discharge optical emission spectroscopy and X-ray photoelectron spectroscopy analysis revealed the considerable difference in the chemistry and elemental distribution across the oxide scale of SMATed and non-SMATed specimens. Adherent, denser, and thinner scale, dominated by nanocrystals of Cr- and Mn-rich oxides, is formed on the SMATed steel. However, the Fe-oxide dominated scale containing micro-crystals is found on the non-SMATed specimens, which shows noticeable exfoliation. A high density of grain boundaries and lattice defects in the SMATed layer display admirable reactive diffusion properties of Cr and Mn during oxidation of steel, instigating the formation of a protective oxide scale. The SMATed specimens exhibit multiple zones in the oxide scale: (i) Cr/Mn depleted outer layer, (ii) Cr-/Mn-rich inner layer, and (iii) gradually decreasing Cr/Mn region.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
