High-temperature oxidation behavior of TA15 aerospace titanium alloy at 500 °C and 800 °C

Abstract

This study investigates the high-temperature oxidation behavior and performance of TA15 Ti alloy subjected to 500 and 800 °C service conditions. The oxidation process, microstructural evolution, mechanical property changes, and comprehensive performance were analyzed. At 500 °C, the alloy developed a distinctive blue-colored surface primarily composed of Ti6O, indicating a slow growth rate of the oxide layer. In contrast, the 800 °C condition led to severe oxidation with notable TiO2 and Al2O3 phases and extensive peeling of the oxidation layer. Microstructural analysis revealed that at 500 °C, there was minimal surface oxidation, and the microstructure showed a shallow heat-affected zone. At 800 °C, repeated oxidation and peeling cycles resulted in grain growth and a significant decrease in the β-phase proportion. Mechanical property assessments indicated an increase in micro Vickers hardness at both temperatures, with the 800 °C sample exhibiting higher values. However, tensile strength decreased significantly at 800 °C due to the severe oxidation layer peeling, reducing the effective thickness during tensile testing. In summary, TA15 demonstrated good high-temperature service performance at 500 °C, while at 800 °C, severe oxidation and peeling adversely affected the overall performance. This research provides insights into the differential high-temperature behavior of TA15, crucial for applications in elevated temperature environments.