Abstract
Porous silicon carbide (SiC) ceramics were fabricated by an oxidation‐bonding process in which the powder compacts are heated in air so that SiC particles are bonded to each other by oxidation‐derived SiO2 glass. Because of the crystallization of amorphous SiO2 glass into cristobalite during sintering, the fracture strength of oxidation‐bonded SiC ceramics can be retained to a relatively high level at elevated temperatures. It has been shown that the mechanical strength is strongly affected by particle size. When 0.6 μm SiC powders were used, a high strength of 185 MPa was achieved at a porosity of ∼31%. Moreover, oxidation‐bonded SiC ceramics were observed to exhibit an excellent oxidation resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
