Abstract
Ceramics, Composite Material, GFRP, Clay, Recycling, Bending strength Abstract In this study, as the effective recycling technique for the waste GFRP, the process for the producing the porous glass fiber reinforced ceramics by firing the mixture of the clay and the crushed waste GFRP was proposed. The proposed recycling technique for the waste GFRP enables to produce various ceramics parts by effectively reusing the glass fibers included in the waste GFRP as well as to dispose injurious GFRP radically. By changing the mixing ratio of the waste GFRP and clay, and by firing the mixture at some temperatures, several kinds of ceramics specimens (tiles) were produced. The microstructure of each specimen was observed using the SEM and the microscope, and then water absorption and the bending strength of the specimens were examined in detail by comparison with those of specimens without the glass fiber. From those results, it was confirmed that the high-strength porous glass fiber reinforced ceramics could be produced by our proposed process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.