Abstract
As the scale of additive manufacturing process (e.g., laser spot size, powder particle size, powder layer thickness) decreases, the application of micro laser powder bed fusion (μ-LPBF) involves novel mechanisms for process, microstructure and performance coordination. This study provides a systematic view of the processing window and performance enhancement of high-strength Al-Mg-Sc-Zr alloy fabricated by μ-LPBF. The effects of μ-LPBF parameters on defect control and densification activity of the printed parts were analyzed, so as to obtain the suitable processing window. The influence of building orientation and heat treatment on microstructural characteristics and mechanical properties of μ-LPBF processed parts was studied. The μ-LPBF Al-Mg-Sc-Zr exhibited sound surface quality (Ra of 6.088 μm) and considerably refined grains with an average size of 1.102 μm, which was related to the high cooling rate (8.6 × 107 K/s) induced by a small-sized laser beam (25 μm) and a tiny powder particle size distribution (2–20 μm) applied in μ-LPBF. After aging treatment (325 °C/4 h), the superior ultimate tensile strength of 590.24 ± 4.75 MPa combined with the sufficiently high elongation of 11.99 ± 1.17 % was achieved. Due to the significantly decreased scale of μ-LPBF production, the anisotropy caused by the variation of building directions was negligible. These enhanced mechanical properties were attributed to the combined effect of the grain size refinement, the higher number density (1.2 × 1024/mm3) of interior precipitates within grains, and the small-sized molten pool size of μ-LPBF. Computational fluid dynamics (CFD) simulation was applied to reveal the molten pool thermodynamics, indicating that a higher thermal temperature gradient (up to 9.8×107 K/m), a smaller molten pool size (with the width of 38.7–69.8 μm and depth of 8.7–30.0 μm) were generated in μ-LPBF. This work presents great potential in processing high-precision metallic components with fine structural feature size and satisfactory manufacturing quality.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
