Abstract
Raytheon Infrared Operations (RIO) has achieved a significant technical breakthrough in uncooled FPAs by reducing the pixel size by a factor of two while maintaining state-of-the-art sensitivity. Raytheon has produced high-quality 320 X 240 microbolometer FPAs with 25 μm pitch pixels. The 320 X 240 FPAs have a sensitivity that is comparable to microbolometer FPAs with 50 micrometers pixels. The average NETD value for these FPAs is about 35 mK with an f/1 aperture and operating at 30 Hz frame rates. Good pixel operability and excellent image quality have been demonstrated. Pixel operability is greater than 99% on some FPAs, and uncorrected responsivity nonuniformity is less than 4% (sigma/mean). The microbolometer detectors also have a relatively fast thermal time constant of approximately 10 msec. This state-of-the-art performance has been achieved as a result of an advanced micromachining fabrication process. The process allows maximization of both the thermal isolation and the optical fill-factor. The reduction in pixel size offers several potential benefits for IR systems. For a given system resolution (IFOV) requirement, the 25 μm pixels allow a factor of two reduction in both the focal length and aperture size of the sensor optics. The pixel size reduction facilitates a significant FPA cost reduction since the number of die printed on a wafer can be increased. The pixel size reduction has enabled the development of a large-format 640 X 512 FPA array applicable to wide-field-of-view, long range surveillance and targeting missions, and a 160 X 128 array where applications for miniaturization and temperature invariance are required as well as low cost and low power.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have