Abstract

Asymmetric structures were fabricated by depositing Y2O3‐doped SiO2 (Si/Y) membranes onto γ‐Al2O3 supported by tubular α‐Al2O3. The thickness of the Y2O3‐doped SiO2 deposits was approximately 100 nm. The deposits/membranes have micropores with a pore diameter ~ <0.40–0.55 nm. Pore size distribution measurements were conducted directly on the membranes before and after hydrothermal treatment with a nano‐permporometer. The gas permeance properties of the membranes were measured in the temperature range 100°C–500°C. The Y‐doped SiO2 membrane (Si/Y = 3/1) was found to exhibit asymptotically stable permeances of 2.39 × 10−7 mol/m2/s/Pa for He and 6.19 × 10−10 mol/m2/s/Pa for CO2, with a high selectivity of 386 (He/CO2) at 500°C for 20 h in the presence of steam. The Y‐doped silica membranes exhibit very high gas permeances for molecules with smaller kinetic diameters. The apparent activation energies of the H2 permeance at 400°C were 24.2 ± 0.2 and 21.3 ± 0.7 kJ/mol for SiO2 and Si/Y, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.