High-quality silicon/insulator heteroepitaxial structures formed by molecular beam epitaxy using Al 2O 3 and Si

Abstract

Heteroepitaxial growth of γ-Al 2O 3 films on a Si substrate and the growth of Si films on the γ-Al 2O 3/Si structures by molecular beam epitaxy have been investigated. It has been found from AFM and RHEED observations that, γ-Al 2O 3 films with an atomically smooth surface with an RMS values of ∼3 Å and high crystalline quality can be grown on Si (1 1 1) substrates at substrate temperatures of 650–750°C. Al 2O 3 films grown at higher temperatures above 800°C, did not show good surface morphology due to etching of a Si surface by N 2O gas in the initial growth stage. It has also been found that it is possible to grow high-quality Si layers by the predeposition of Al layer followed by thermal treatment prior to the Si molecular beam epitaxy. Cross-sectional TEM observations have shown that the epitaxial Si had significantly improved crystalline quality and surface morphology when the Al predeposition layer thickness was 10 Å and the thermal treatment temperature was 900°C. The resulting improved crystalline quality of Si films grown on Al 2O 3 is believed to be due to the Al 2O 3 surface modification.