Abstract
The high absorption confined-doped ytterbium fiber with 40/250 μm core/inner-cladding diameter is proposed and fabricated, where the relative doping ratio of 0.75 is selected according to the simulation analysis. By employing this fiber in a tandem-pumped fiber amplifier, an output power of 6.2 kW with an optical-to-optical efficiency of ∼82.22% is realized. Benefiting from the large-mode-area confined-doped fiber design, the beam quality of the output laser is well maintained during the power scaling process with the beam quality factor of ∼1.7 of the seed laser to ∼ 1.89 at the output power of 5.07 kW, and the signal-to-noise ratio of the output spectrum reaches ∼40 dB under the maximum output power. In the fiber amplifier based on the 40/250 μm fully-doped ytterbium fiber, the beam quality factor constantly degrades with the increasing output power, reaching 2.56 at 2.45 kW. Moreover, the transverse mode instability threshold of the confined-doped fiber amplifier is ∼4.74 kW, which is improved by ∼170% compared with its fully-doped fiber amplifier counterpart.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
