High-Performance Photovoltaic Constant Power Generation Control With Rapid Maximum Power Point Estimation

Abstract

Photovoltaic (PV) constant power generation (CPG) control is regarded as an advanced active power control by limiting the maximum feed-in power in order to avoid the adverse impacts of high-penetration PV systems such as overloading and overvoltage. Conventional CPG strategies show obvious limitations in terms of the dynamics response, oscillations during the steady state, and the estimation speed of limited power points (LPPs). In this article, a novel CPG control with the rapid approach to LPPs is proposed with the estimation of maximum power point (MPP), which guarantees fast converging speed in response to rapid changes in environmental conditions and low power oscillations for the steady state. Specifically, the proposed control allocates the operating point at the left-hand side of the MPP, which can not only avoid the instability issue but also simplify the MPP and LPP estimation according to the single-diode PV equivalent model. Furthermore, based on the estimated available power $P_{\rm avi}$, the proposed CPG control contributes a direct solution in approaching the region around LPP or MPP, which improves the converging speed under environmental-changing conditions. Thus, regardless of the changes in irradiance or temperature, high-performance and reliable operation are ensured by switching the maximum power point tracking mode and CPG mode smoothly. The proposed control can be directly applied for the existing PV system and no additional hardware devices such as irradiance sensors are required, which is cost effective. A systematic comparison of the proposed control with other advanced CPG strategies was made under various scenarios and the advantages of the proposed control were validated experimentally.