Abstract
Monitoring the highly volatile dimethylamine (DMA) vapour pays an important issue for the health and safety of humans. The atomization requires an electronic nose for detecting and controlling the toxic gases in the environment. The binary metal oxides of Titanium dioxide (TiO2) and Vanadium oxide (VOx) have been used for gas/vapour sensing applications for the past few decades. However, the binary metal oxides have low selectivity and sensitivity issues in real-time applications. Therefore, mixed metal oxides are attractive alternates for gas sensing application. The mixed metal oxide TiO2-VOx thin film was deposited by reactive co-sputtering technique and investigated for their structural, morphological, and sensing properties. For the first time, we report the DMA vapour sensing properties of TiO2-VOx at room temperature. Among many vapours, such as methanol, ethanol, formaldehyde, isopropanol, acetone, and DMA, the TiO2-VOx is highly selective towards DMA than the other binary oxides VOx and TiO2. The DMA vapour sensing studies proves that the deposited mixed metal-oxide had better sensing response of ~ 3.6 to a minimum concentration of 10 ppm at room temperature than binary oxides of VOx and TiO2.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
