Abstract
Indium-free ZTO/Ag/ZTO multilayer electrodes were deposited on glass by RF sputtering of zinc tin oxide (ZTO) and pulsed DC sputtering of silver (Ag) at room temperature in the specially designed Inline sputtering system and evaluated as transparent electrode of organic photovoltaic cells (OPVs). The dependence of the electrical and optical properties of ZTO films on the O2/Ar + O2 ratio was investigated. We fabricated the ZTO/Ag/ZTO multilayer electrode with a sheet resistance of 8.38–10.18 Ω sq−1 and average transmittance of 84.4–85.5% in the visible region (λ = 380–770 nm), which is compatible with commercial indium tin oxide (ITO). As an application, organic solar cells fabricated on the ZTO/Ag/ZTO multilayer electrodes with the conventional device architecture were compared with those on commercial ITO electrodes. The bulk heterojunction OPVs fabricated on the multilayer electrodes exhibited a short-circuit current (JSC) of 7.06 mA cm−2, a fill factor (FF) of 0.62, an open-circuit voltage of (VOC) of 0.64 V, and a power-conversion efficiency of 2.80%. This indicates that ZTO/Ag/ZTO multilayer electrode is a promising electrode scheme for bulk heterojunction organic photovoltaic cells (BHJ-OPVs).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
