Highly Thermally Conductive Flexible Biomimetic APTES-BNNS/BC Nanocomposite Paper by Sol-Gel-Film Technology.

Abstract

Owing to the evolution of 5G technology, new energy vehicles, flexible electronics, miniaturization and integration of microelectronic devices, high-frequency and high-power devices, and thermal management of materials must consider additional limitations such as electrical insulation, excellent transverse heat transfer, flexibility, and weight. Boron nitride nanosheets (BNNSs) are ideal insulating materials with high thermal conductivity. However, the problem of the 3D thermal conductivity pathway and toughness strength of nanocomposite paper loaded with inorganic thermal conductivity fillers remains a huge challenge. In this study, we propose a new method for preparing ultrathin, large, and uniformly thick BNNS for quantitative production. Bulk hexagonal boron nitride (hBN) layers were exfoliated using a simple and low-cost hydrothermal reaction, and large-scale fewer-layered BNNSs were efficiently prepared by ball milling with a high yield (up to 80%). Based on the aforementioned step, a flexible insulating composite film with high thermal conductivity and a natural "brick-mud" shell structure was constructed via the sol-gel-film conversion method. After prestretching and hot-pressing treatment, the hydrogels became denser, and the modified BNNS formed a three-dimensional (3D) network structure with an ordered orientation and interconnections in the bacterial cellulose (BC) matrix. After 100 folding cycles, the tensile strength of the nanofiber composite film reached 53 MPa, and the strength retention rate exceeded 42%. By optimizing the modified BNNS content, the thermal conductivity reached 24 W/(m·K). This simple approach has wide application potential in the next-generation electronic devices, providing options for designing thermal interface materials with excellent electrical insulation, high thermal stability, and flexibility.