Abstract

Photoelectrochemical (PEC) sensors have emerged as a promising candidate for biochemical detection. However, PEC sensors based on bulk semiconductors are limited by sensitivity and detection varieties, though they can provide uniform imaging; PEC sensors based on nanomaterials can meet the requirements of various analytes and sensitivity, but the inhomogeneity of their surface poses a challenge to imaging uniformity. In this work, metal-assisted chemical etching (MACE) and sputtering processes were used to directly fabricated PEC sensors with fireworks-like silicon nanowires (F-SiNWs) and their heterojunctions with excellent performance. Through regulating the etching and sputtering times, the structure and nanomaterials attachment of F-SiNWs can be well controlled. The photoelectric and sensing properties of F-SiNWs with different morphologies were investigated and optimized. Then, the sensor fabricated by optimal F-SiNWs can directly detect H2O2 and indirectly detect glucose under negative bias, while directly detect dopamine (DA) under positive bias. The detection of these three analytes do not interfere with each other, contributing to an excellent multichannel detection system. Subsequently, the multichannel detection of various secretions (H2O2, DA and glucose) of PC-12 cells was achieved by the sensor. Finally, the imaging uniformity of the sensor was demonstrated in different solutions. PEC bioimaging was successfully applied to monitor enzyme activity by bioimaging gradients and cell survival by bioimaging distribution. These results demonstrate the high sensitivity in multichannel detection and excellent stability and homogeneity in bioimaging of the sensor. Therefore, MACE and sputtering process can be a promising tool for constructing PEC sensor.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call