Highly sensitive interferometry with strong anti laser jamming capability based on frequency shift optical feedback

Abstract

With the proliferation of diverse laser equipment, the optical environment in which highly sensitive optical systems operate has become harsh and intricate. Mitigating laser jamming originating from the operational waveband is a challenging problem encountered by laser interferometric measurement systems. In this paper, we set forth a robust anti-jamming optical interferometry with high sensitivity. This method is based on frequency shift optical feedback, namely anti-jamming laser feedback interferometry (AJLFI). A rear-end pumping Nd:YVO4 microchip laser with bidirectional output channels is employed as the interferometric system source, and the photodetector is posterior to the laser cavity. This particular laser structure and the unique detector placement method from optical feedback interferometry make the laser cavity operate as a high-stop-band filter to filter out laser jamming in the operational waveband. In the AJLFI-based system we established, the jamming laser with a wavelength equaling that of the interferometric system suffers a notable attenuation of 44.8 dB. Concurrently, jamming laser falling within a range of ±10 nm from the wavelength of interferometric system gets an attenuation exceeding 44.43 dB. In addition, we set up the standard laser feedback interferometry(LFI)-based system and the Michelson heterodyne interferometry(MHI)-based system with the same experimental parameters as the AJLFI-based system to perform anti-jamming capability comparative experiments. In the experiments, a pulsed laser beam with a peak power of 1780.9 W is employed as laser jamming in the operating wavebands, which is precisely directed toward the target in conjunction with the probe light of the interferometric systems and scattered into the interferometric systems. The experimental findings demonstrate that the AJLFI-based system exhibits superior anti-jamming capability in both phase and amplitude measurements compared to conventional LFI-based and MHI-based systems.