Abstract

CuO–NiO nanocomposites have been prepared after calcining fiber mats at 450 °C by electrospinning technique. The samples are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. SEM micrographs depict regular nanofibers without beads. The XRD and TEM results confirm that as-synthesized materials are the composite nanoparticles composed of the crystal phases of CuO and NiO. An enzyme-free glucose sensor has been first fabricated with nanocomposites CuO–NiO-modified on glassy carbon electrode (GCE). Cyclic voltammetry and current-time curve techniques are mainly used to enlighten the electrochemical properties of the modified electrode (CuO–NiO/GCE) in alkaline aqueous solutions. Experimental parameters like applied potential and concentration of modifier on GCE have been optimized, and the analytical performances of as-fabricated biosensor for glucose determination have been investigated in detail. Under optimal conditions (8.0 μL modifier, +0.55 V), CuO–NiO/GCE exhibits excellent properties in glucose detection for the concentrations with a fast response (~1s), a low detection limit of 0.08 μM (S/N = 3), a wide range of 0.2 μM–1.0 mM with a linear correlation coefficient of 0.998 and a very high sensitivity of 4022 μA mM−1 cm−2. In addition CuO–NiO/GCE shows good selectivity, reproducibility and longtime stability. Excellent electrochemical catalytic performance for glucose demonstrates that as-synthesized nanocomposite CuO–NiO is an outstanding and promising electrode material toward glucose.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.