Abstract

Heavy metal ions are common pollutants in the water environment, which have caused severe damage to the water environment, so it is necessary to monitor them. In this work, an electrochemical sensor based on aminated Zn (Ⅱ) metal-organic framework (ZIF-8-NH2) enhanced by carbon nanotubes (CNTs) and bismuth (Bi) film was prepared for simultaneous detection of lead ions (Pb2+) and cadmium ions (Cd2+) in water samples. The ZIF-8-NH2/CNTs was prepared by electrostatic assembly with ultrasonic assistance. The results show that the combination of ZIF-8-NH2 and CNTs not only can promote the three-dimensional distribution of CNTs, but also compensated for the poor electrical conductivity of ZIF-8-NH2. Furthermore, the deposition of Bi film in situ promoted the enrichment of Pb2+ and Cd2+ in the detection process, further enhancing the electrochemical signal. Based on this, the prepared sensor displayed good linear ranges of 0.050–1.000 μM (Pb2+) and 0.100–0.700 μM (Cd2+), lower detection limits of 8.00 nM (Pb2+) and 12.0 nM (Cd2+) under optimal experiment condition. At last, this sensor was successfully applied to simultaneously detect Pb2+ and Cd2+ in paddy water and lake water with recovery rates of 97.88 ∼ 104.06% and relative standard deviation (RSD) lower than 6.24%. Most importantly, there is no significant difference between the developed electrochemical method and certified method (P < 0.05). This work provides a new idea for the simultaneous detection of heavy metal ions in the water environment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call