Abstract
An erythromycin (ERY) detection method is proposed using the fiber optic core decorated with the coatings of silver and an over layer of ERY imprinted nanoparticles. Synthesis of ERY imprinted nanoparticles is carried out using miniemulsion method. The operating range of the sensor is observed to be from 1.62×10−3 to 100µM while the sensor possesses the linear response for ERY concentration range from 0.1 to 5µM. The sensing method shows a maximum sensitivity of 205nm/µM near ERY concentration of 0.01µM. The detection limit and the quantification limit of the sensor are found to be 1.62×10−3µM and 6.14×10−3µM, respectively. The sensor’s applicability in real samples is also examined and is found to be in good agreement for the industrial application. The sensor possesses numerous advantages like fast response time (<15s), simple, low cost, highly selective along with abilities towards online monitoring and remote sensing of analyte.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.