Abstract
In this paper, a novel amperometric CO sensor using Nafion and Pt/C composite electrodes was fabricated. Three kinds of carbon materials (carbon fibers, multiwall carbon nanotubes and carbon blacks) were utilized as the supports of the sensing and reference electrodes for the CO sensors. The results revealed that the effective Pt loadings on the electrodes increased in the following order: carbon fibers (CFs)>multiwall carbon nanotubes (MWCNTs)>carbon blacks (CBs), leading to the increasing of the sensitivities toward CO in same order. In other words, the sensor using Pt/CFs as the sensing electrode (SE) showed the highest sensitivity with the value of 0.077μA/ppm and shortest response time in the range of CO concentration from 1 to 200ppm at room temperature. Further, a reproducible and stable response against 50ppm CO was obtained for the sensor with Pt/CFs SE materials. Moreover, a low detection limit of 0.1ppm for CO was also examined, suggesting that the sensor can be convenient for detecting very low traces of CO.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
