Abstract
The recycling of electronic waste, i.e., waste Printed Circuit Boards (WPCBs), provides substantial environmental and economic advantages. In fact, the concentration of valuable precious and base metals in WPCBs is even higher compared to those found in mined ores. Nevertheless, it is still challenging to selectively extract precious metals with low concentrations from the pregnant leaching solution, due to the co-deposition of base metals, like Cu, which have higher concentrations. In this research, stepwise recovery of precious metals and copper directly from WPCBs thiosulfate leaching solution was facilitated by the Ti cathode coated with MoS2 (MoS2/Ti). The in-situ enrichment of Au(S2O3)23- and Ag(S2O3)23- at the surface of MoS2 enables the high efficiency and selectivity of electrodeposition, which has been confirmed through COMSOL Multiphysics simulations and visualization. As a result, the first-step electrodeposition at 0.6 V recovered 92.44 % Au and 98.18 % Ag without any co-deposition of Cu. Subsequently, the second-step recovery employed a constant current of 0.03 A, achieving 100 % recovery of copper within 12 h. Furthermore, this study optimized the reduction potential, NH3·H2O concentration, and S2O32- concentration for the stepwise electrodeposition process. These findings provide valuable insights for establishing a closed loop circular economy in the electronics industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.