Highly Selective Mixed Potential Methanol Gas Sensor Based on a Ce0.8Gd0.2O1.95 Solid Electrolyte and Au Sensing Electrode.

Abstract

A Ce0.8Gd0.2O1.95-based mixed potential type sensor attached with a commercially available Au paste sensing electrode material was fabricated to detect methanol. The optimum working temperature of the sensor was 545 °C, and the response value to 100 ppm methanol was -53 mV. The selectivity of the sensor was poor. The addition of a 4A molecular sieve filter layer and the method of pattern recognition were combined to improve it. Only gas molecules smaller than the pore diameter of the 4A molecular sieve were able to pass through the zeolite channel, and the selectivity coefficient of the sensor to methanol was improved by adding the filter layer. Meanwhile, there was an obvious distinction between the response and recovery times of the sensor toward methanol, ethanol, acetone, n-butanol, and n-pentanol. Next, the pattern recognition method was adopted. The relationship between the response value and the logarithm of gas concentration and the relationship between the maximum rate of the response process and the gas concentration were plotted separately. By comprehensively considering the two characteristic parameters of the response value and the maximum value of the differential response signal, the purpose of qualitative identification of gas types and quantitative analysis of gas concentrations was hopefully achieved.